Step by Step – Tulip on Polydraw Drafting Film

Art, Color pencil, Colored Pencil, Colour pencil, coloured pencil, Drafting Film, Polychromos

I must start by clarifying that this isn’t really a proper step by step as I hadn’t intended to blog this until I was asked to. I worked in Polychromos but as any pencils can be used I am not really specifying colours although am mentioning a few when they have been used to mix.

Apologies for the changing colours especially of the background which is all to do with light quality when I took the photos. I really hadn’t been intending to share in this way so only took them for my own use as I worked. I always do this as it really helps me see what I need to do next and anything that looks ‘wrong’.

img_7522

I began by drawing my tulip lightly using a light coloured pencil. As you can work on both sides of drafting film on the reverse I lightly shaded in the lightest areas and dark stamen to create some depth. All the way through I only used the pencils themselves to blend.

The first petal shows the stages of very light layering and the way colour is used to build up contour and depth.

 

img_7523

Here you can the completed petal and again the light layers on the second one. It really is a question of slowly building up the colour. The lilac colour on the edge is a mix of pale pink and sky blue. Towards the centre I have laid in white and then started to overlay colour. I have also deepened the light layers on the stamen working on the front this time.

 

img_7574

Working gradually to build up the layers in the second petal and layering indigo and mauve on top of the pinks on the outer edge to create the shape.

 

 

img_7578

I am now beginning to lightly layer the third petal which as you can see is much lighter than the first two. Although white will go over other colours on the drafting film I did try to maintain the white wherever possible.

img_7579

This shows the completed third petal and the light layers at the start of the fourth (lower) and fifth (upper) petals.

img_7580

In order not to lay on the work already completed I decided to focus on the fourth petal, still building up layers slowly.

fullsizeoutput_a12

I then continued using light layers and colour to show the contours of the petal until I was happy with the depth of colour and tone.

 

 

img_7586

Out of all the petals it was this, the fifth petal that gave me most grief. I am not sure if it was the markings on it or the shape of it but all I could do was persevere laying down the light layers of colour and looking closely at the markings.

 

 

img_7595

Here  you can see the finished fifth petal and the beginning of the final one.

 
img_7597

 

As the final stage is complete I checked to see if my darkest darks and lightest lights were ok. If needed I could have now gone to the reverse of the drafting film and worked there deepening and lightening to create the depth I wanted.

If I had reached saturation point on the front of the film or had managed to strip away or polish the surface of the film so it wouldn’t take any colour I could have also used the back of the film to fill in any gaps.

 

For those who wonder why drafting film let me share with you the one I did on the tracing type paper use to separate layers of drafting film. I hasten to say I did this in error not deliberately. img_7519

Same colours and make of pencil used but as you can see the vibrancy and translucency that drafting film gave me is absent.

Advertisements

One thought on “Step by Step – Tulip on Polydraw Drafting Film

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s